After launching its EK-Nucleus CR Vision watercooling kits, the Slovenian brand is back with a new version. This time, it does without the LCD screen of the pump to focus only on the RGB lighting. So here are the EK-Nucleus CR Lux!
EK-Nucleus CR Lux: a version without LCD screen !
Like the Vision models, this Lux series benefits from two heatsink sizes with a 360mm and a 240mm. The pump still retains its current shape, but it trades the LCD screen for an aRGB lighting system, which will also be found on the fans.
In terms of construction, we still find an aluminum radiator with a thickness of 27 mm, classic. On the pump side, we find a PWM powered model that can be regulated from 20% of the PWM signal to 100%. The latter will operate at 3100 RPM at full speed. However, we have no idea about its flow rate.
In terms of ventilation, we find two or three fans in 120 mm. They operate from 550 RPM to 2300 RPM. At full speed, the air flow shows 73 CFM, but the static pressure is not specified, too bad. 
Finally, compatibility is assured for the AM5 and LGA-1700 platforms. Older generations are also concerned, such as theAM4 or the LGA-1200/115x and even the LGA-2000.
As far as prices are concerned, the 240mm will cost 159,90 € and the 360mm will cost 199,90 €.
Here are the technical data sheets of EKWB!
