[Tweak League] Tutorial: Overclock your RTX 4060 and get 10% FPS

Overclocking Facile (10 min)

The easy way: Undervolting (10 min)

This allows us to increase performance while reducing the voltage and therefore the temperature of the graphics card.

Please follow the steps below:

Open the CURVE EDITOR window at the bottom left of MSI Afterburner. Hold down SHIFT and then LEFT-CLICK on the point above 950 mV. We’ll drag it up to 250 Mhz. RELEASE ALL.

Now press SHIFT again and LEFT-CLICK just to the right of the point you’ve just moved (you mustn’t click on a point). By holding SHIFT LEFT CLICK you have selected all the points on the right of the graph. Release SHIFT and CLICK. Now LEFT CLICK on any point within the selected area (to the right of the 950 mV point) and pull it down to 0.

Validate your curve with the button to the right of the diskette on the main menu. You should obtain the following curve.

Set your POWER LIMIT to maximum. The same goes for TEMP LIMIT.

In MEMORY CLOCK type 800 then enter

Re-validate your settings with the icon on the right of the diskette.

Save the profile by clicking the DISKETTE and then the “1” on the right of the menu.

The results:

Performance gains:
95.8 FPS or 1.25% on Borderlands 3.
83.04 FPS or 1.57% on Metro Exodus.
117.38FPS or 3.01% on Cyberpunk 2077.

So there’s a small gain in in-game performance, even though we’ve just lowered the voltages, and therefore the temperature. So you can play for hours without any loss of performance.

This undervolting should have no impact on the stability of your graphics card. Run the free OCCT software for 10 minutes on the Stability test 3D Standard, and if ever there’s a crash, simply open MSI Afterburner and use the icon on the left of the floppy disk, then the one on the right to validate the modifications and return to the default settings.