Temperature/Noise Ratio
On these perf/noise ratio graphs, we remind you that the best is to be placed as much as possible at the bottom left of the graph. For the reading, the left most point symbolizes the ventilation in 12V, the one in the center the ventilation in 8V and the right most in 5V.
Clearly, if your processor does not consume much current, there is no need to run this model at full speed. It will clearly be noise “for nothing”. In this case, you should run it at maximum around 1300/1400 rpm to get the best out of it.
In 95W, once again our model of the day is penalized by a too excessive noise. Compared to the competition, it has difficulty to impose itself, especially at full speed where the curve points ” to the moon “. However, at half speed, it can make the AK500 and AS500 Plus sweat a lot.
With a power consumption of 125W, even if the temperatures are good, the Jonsbo fan is again penalized by its excessive noise. As it is, it doesn’t compete with the best fans of our selection… Although it eats the Dark Rock 4 from be quiet! and tickles the AK500 from DeepCool at low speed.
